New: Next Client, free leads for MEPF firms.Try Next Client
Case study · Orbit Engineering Services · Nov 11, 2026

Orbit placed 11,818 MEPF tags in the last 6 weeks

Orbit is a small Australian HVAC detailing firm, a BIM team of a few people. Two of them use RayCAD every week, on 22 projects, from single rooms to hospitals, offices and commercial buildings. 30,434 tags since Jun 28. All numbers below come from RayCAD's own usage log.

24 sMedian tagging run90% of runs finish in 91 s
0Crashesacross 109 Revit sessions
30,434Tags placed since Jun 28190 runs, 0 write failures
~122 hDrafting time saved152 h by hand at 200 tags/h, 80% less time
89.3%Of tags kept81.2% never touched
22Projectsrooms to full hospitals
$5k+Saved so fara small BIM team of a few people
~56 hSaved every monthat November's pace of 14,000 tags
01Speed and reliability
Speed and reliability

A tagging run takes 24 seconds, and it does not crash

Half of all runs finished in under 24 seconds. Nine in ten finished in under 91 seconds. Across 109 Revit sessions RayCAD did not crash once.

Median run24.2 s
90th percentile91.3 s
Largest run298 s, one run of 2,794 tags
1,066tags in 30 sOne floor plan, Aug 14
1,437tags in 48 sOne floor plan, Aug 14
94.7%tags placed30,434 of 32,143. 0 write failures.

Results of what RayCAD produces: real sheets, tagged to the firm's standard.

02Time saved
Time saved

152 hours of tagging became about 30

Since Jun 28: 30,434 tags by hand at 200 tags an hour is 152 hours, or 19 eight-hour days. With RayCAD, Orbit's drafters spent about 80% less time on the same work.

By hand152 h · 19 days
With RayCAD30 h · 4 days
~122 hSaved since Jun 2815 drafter-days back for modelling and clash work.
~56 hSaved every monthAt November's pace of 14,000 tags. That is 7 drafter-days a month.
$5k+Saved so farFor a small BIM team of a few people.
03At your team size
At your team size

All of this came from a team of two

Orbit is a small BIM team of a few people, and two of them use RayCAD every week. Every number on this page is their work. Scaled in a straight line to bigger drafting teams, at the same work per person (200 tags an hour by hand, 80% less time, 2,000 h a year per drafter):

$40 / h
$15 / h$120 / h
2 people (Orbit)56 h · $2,240/mo saved
10 people280 h · $11,200/mo saved
20 people560 h · $22,400/mo saved
50 people1,400 h · $56,000/mo saved
$26,880Saved a year, 2 people672 h a year at November's pace.
$134,400Saved a year, 10 people3,360 h · 1.7 drafters freed
$268,800Saved a year, 20 people6,720 h · 3.4 drafters freed
$672,000Saved a year, 50 people16,800 h · 8.4 drafters freed
04After tagging
After tagging

9 in 10 tags stayed where RayCAD put them

Whenever a RayCAD tag is moved or deleted, RayCAD counts it locally. Tracked on 139 runs and 16,926 tags since Sep 25.

Untouched81.2%11,402 tags
Moved a little8.2%1,145 tags
Deleted8.6%1,211 tags
Not scored2.1%289 tags

Runs the drafter kept: 127 runs, 14,047 tags.

45%Of runs needed zero edits57 of 127 kept runs
91.5%Tags kept on floor plans76 runs, 11,758 tags
86.7%Tags kept on sections43 runs, no undo on any

The undo runs

12 of the 139 tracked runs were fully undone with Ctrl+Z. In 10 of those 12, the drafter checked the sheet for 10 to 120 seconds, undid the run, changed a rule or the element selection, and ran RayCAD again right away. That is how they tune a run, and it is fast because a run takes seconds. These 12 runs hold 74.5% of all deleted tags (2,879 of 3,867). The kept-run numbers above leave these 12 out. They are shown here so nothing is hidden.

05What Orbit says
What Orbit says

Three voices, one answer

Translated and paraphrased from their own words. The substance is theirs.

Vipul PanchalDirector · Owner, more than 15 years in the industry

Tagging was the bottleneck on how many projects we could take on. Cutting that work down gave us room for more jobs and added straight to our revenue.

Firms adopting AI tools are setting a faster pace in this market. We stay competitive without adding headcount, and revisions go back to clients sooner.

Their support team gets on a call whenever an engineer runs into a problem and fixes bugs fast. That reliability shows up in every project we deliver.

Akshay AdhikarySenior BIM modeler · Daily user

I spend most of my day on modelling and clash resolution now. Long hours of placing tags one by one are behind me.

On each sheet, I check the layout and nudge a few tags in tight spots. Having that tedious work off my plate keeps me focused on the engineering.

Soumyajit DasDirector · More than 15 years in the industry

Tags follow our firm's standards across every sheet, so I spend far less time cross-checking the team's drawings.

Missed tags used to slip through right before a submission deadline. RayCAD catches every element automatically, which keeps drawing quality consistent when schedules get tight.

Sheets clear review cleanly, and we hit our issue dates without last-minute rework.

06Adoption
Adoption

November is on pace for the biggest month yet

Orbit started on Jun 28. Weekly use has not broken since Aug 10. November has 11 days in it. At the same daily rate (5,220 tags in 8 workdays) it ends above 14,000 tags. The hatched part is the projection.

Jun (3 days)745 tags
Jul5,957 tags
Aug3,980 tags
Sep7,934 tags
Oct6,598 tags
Nov (11 days)5,220 so far · 14,000+ projected
14Weeks in a rowUsed every week since Aug 10
190Runs since Jun 28109 Revit sessions, 0 crashes
5Revit versions2022 to 2026, all in use
07Method
Method

How we measured it

RayCAD logs each run: how many tags it tried, placed and skipped, how long it took, and what the drafter did to the tags afterward. Nothing from drawings leaves the machine. The data covers Jun 28 to Nov 11, 2026, 136 days. Hours saved assume 200 tags an hour by hand and 80% less time with RayCAD, counted on all 30,434 tags placed since Jun 28.