New: Next Client, free leads for MEPF firms.Try Next Client

Auto-tag MEPF sheets in Revit.

RayCAD tags your whole view to your firm’s placement standard, arranging tags neatly without overlaps so you only review the sheet.

No credit card required

01Why RayCAD
Why RayCAD

Sheets go out faster, fewer RFIs come back, and the same team takes on more projects.

Sheets go out faster

Your drafters review the tags RayCAD placed instead of placing them by hand. At Orbit Engineering Services, tagging takes about 70% less time.

Fewer RFIs come back

Humans miss tags. RayCAD tags every change in size, elevation or direction on every sheet, so fewer questions come back and a sheet is approved with less back and forth.

More projects, same team

The hours spent on tagging go into engineering work, so your team can take on more projects.

02How it works
How it works

RayCAD tags the whole view and hands you the sheet to check.

One run does the whole job

Tag All puts a tag on every element in the view. Leader aligners and tag movers tidy tags someone already placed. Each saves a few clicks, but the drafter still does the main work: knowing where a tag is needed and arranging each one neatly, without overlaps, to the firm's standard.

RayCAD does that part. It reads the model through the Revit API, finds where the information changes and places each tag without overlaps, to your firm's standard, the way a drafter would. It doesn't generate any tag text. It uses your own tag families, which read their values from the model, so a tag can't come out wrong. You set the rules once, pick a view and check the result.

RayCAD · ConfigureNew preset
  • Ducts
  • Pipes
  • Air terminals
Element familyContentTag familySizeElevation

01 Configure

Set your rules once

Choose when a tag goes in, which of your tag families to use and how tags sit along a run. RayCAD keeps the rules, so every run after follows them.

02.2 Placement

Human-like intelligence

RayCAD sees the model and existing tags, decides where a tag is needed from your configuration and finds a neat spot for it.

Where the information changes

RayCAD adds a tag wherever size, elevation or direction changes, and again when a long run goes too far without one. You set these rules in your configuration.

02.3 Live projects

We've taken care of the dealbreakers

The reasons firms drop tagging software, and what RayCAD does about each.

Your computerRayCAD servers

RayCAD runs inside Revit on your machine. Your models, views and families never reach our servers.

03Results
Results

Sheets as RayCAD left them.

Straight from RayCAD, with nothing fixed by hand, including what it got wrong.

HVAC/01, tagged by RayCAD.

Drag to look around the sheet. Pinch, double-click or press + to zoom.

1,012
tags placed
5 h
by hand
13 sec
by RayCAD
04Customers
Customers

Trusted by firms across the world.

“RayCAD has cut our tagging time by over 70%. We spend less time on clerical work and more on engineering, which lets us take on 1.5x more projects and directly adds to our revenue.”
Vipul PanchalDirector, Orbit Engineering Services, Sydney
Read how Orbit tags with RayCAD
05Tagging cost
Tagging cost

Realize how much you are spending on tagging.

Set your monthly sheet count, tags per sheet, and hourly cost. See the payroll going into manual tagging and the team capacity you get back.

sheets
10400
tags
1002,500
$/ hr
$15$200

Assumes 200 tags/hr by hand · 80% saved by RayCAD · 1 month

Tagging by hand

$6,400

spent on tagging today per month

Tags per month
32,000
Drafter hours
160 hrs
With RayCAD

16032 hrs

time spent on tagging

Time saved
80%
Tagging cost with RayCAD
$1,280
Monthly direct saving$5,120Direct payroll saved on tagging
Capacity freed128 hrsAbout 0.8 full-time people freed

Base payroll saved is only half the number. Those 128 hours go back into engineering work and extra projects your firm could not take before.

06Pricing
Pricing

Book a call to start your free trial.

RayCAD gives the best results when it is configured to your firm's standards, which is why we start with a 20-minute call.

You get a 15-day free trial with every feature and unlimited usage. If you barely use it, we extend it for free.

We prove the value on your drawings first, then talk commercials.

No credit card required · Early founding price, 4 spots left

30 min call· Trial & standard setup
November 2026
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Pick a date
07Design partners
Design partners

Need RayCAD to do something it doesn't yet? We build it with you.

Priced by the work involved. What you pay isn't a development charge: it's your RayCAD subscription for X months, paid upfront.

Book a call to discuss
  1. Scope

    We define the problem with you

    • We sit with your team and define the problem properly
    • We scope the solution you need
  2. MVP

    You see value early

    • We build a first version you can start using
    • We take your feedback every week
  3. Delivery

    The full version, production quality

    • We deliver the complete solution to the scope we agreed
    • Built and tested to run on your live projects
08Questions
Questions

Questions drafters ask.

Something else? Write to the founders.

Revit 2021 to 2027, from one installer. RayCAD is maintained and improved continuously, and every new Revit release is supported. It sits in its own tab on the Revit ribbon, so there is no separate app to open.

HVAC and piping: ducts, flex ducts, air terminals, mechanical equipment, generic models, duct fittings, fabrication equivalents, pipes, pipe accessories and pipe fittings. Electrical and fire protection are coming soon.

Floor plans and sections, one view at a time.

Yes. You map your element families to your tag families once, and RayCAD places your tags. It doesn't generate any tag text, so a tag reads its values from the model and can't come out wrong.

Yes. You decide what gets tagged, where a tag goes, how often one repeats along a run and the shortest length worth tagging. Every firm lays tags out differently, so none of this is fixed.

Check the result. The view comes back tagged, with a count of what went in and the few elements worth a second look. The drafter checks it, adjusts what they want and issues the sheet.

No. RayCAD touches nothing but its own tags: not your model, your other tags or any parameters. A run that fails rolls back, and everything it does reverts in one undo.

No. RayCAD runs on your computer and reads the model through the Revit API. No model or project data goes to our servers.

Floating per-seat licensing priced reasonably based on the value your firm gains. Unlimited usage, with free onboarding and direct support from the founders.

Yes. Book a 20-minute call so we can configure RayCAD to your firm's standards and start your 15-day free trial with every feature and unlimited usage. If you barely use it, we extend it for free. No credit card required.

Yes, through our design partner scheme. It is paid and priced by the work involved, and what you pay comes back as credit on your subscription, not a development charge. We define the problem with you, give you a first version to start using, take weekly feedback and deliver the full version at production quality.