Features
- AI tagging in Revit: an AI agent that tags your MEPF drawingsRayCAD is AI tagging for Revit. It does the whole MEPF tagging task on your machine, and your team moves from placing tags to reviewing them.
- Automatic air terminal tagging for Revit: diffusers, slot diffusers, and grillesRayCAD tags diffusers, linear slot diffusers, and grilles in Revit automatically, with system name, type, and airflow, each tag aligned to its terminal.
- Revit annotation automation: tagging, alignment, and sheet tools in one pluginRayCAD is Revit annotation automation for MEPF drawings. It tags a view end to end, then adds tools for re-tagging, review, aligning, connecting conduits, parameter sync, duct cutting, and sheet creation.
- More MEP drafting capacity with the same teamSee how RayCAD frees up engineering hours through automated MEPF tagging, so drafting firms can handle more work without growing headcount at the same rate.
- Revit conduit tag and cable tray tag: size, type, and placementHow to tag conduits and cable trays in Revit: what a conduit size tag and cable tray tag carry, where they go, and how RayCAD approaches placing them automatically.
- Automatic duct tagging for Revit: size, elevation, and flex duct tagsRayCAD places Revit duct size, elevation, and flex duct tags automatically. It tags rectangular, round, oval, and flex ducts where the information changes, in your firm's layout.
- Revit electrical equipment tag: panels, fixtures, devices, and circuitsHow to tag electrical equipment in Revit: panel tags, lighting fixture tags, device tags, and circuit tags. See what each carries and how RayCAD approaches placing them.
- Electrical tagging in Revit: how to tag electrical drawings without the manual grindElectrical tagging in Revit covers conduits, cable trays, equipment, fixtures, and devices. See what electrical tags carry, where they belong, and how automated tagging with RayCAD approaches it.
- Automatic MEP fabrication tagging for Revit: fabrication ductwork tagged part by partRayCAD tags Revit MEP fabrication parts automatically: fabrication ducts, fittings, and accessories, mapped by service and CID type, and placed with the same care as native elements.
- Faster MEPF shop drawing turnaround with RayCADCut manual Revit tagging time, re-tag changed elements after coordination, and review exceptions faster with RayCAD's automated MEPF tagging.
- Reduce drawing-related RFIs and client markups with RayCADReduce avoidable MEPF drawing RFIs, markup requests, and rework caused by missing, incorrect, or unclear Revit tags, with RayCAD's automated tagging and review panel.
- Fire sprinkler tagging in Revit: pipe tags, sprinkler tags, and clean layoutsHow to tag fire sprinkler drawings in Revit: sprinkler pipe size tags, sprinkler head tags, and why placement matters. See how RayCAD approaches fire protection tagging.
- Tagging software that follows your firm's Revit standardRayCAD places MEPF tags to your firm-specific placement standard, from tag position and leader rules to which corner each tag sits in. Your drawings look the same as the ones you ship today.
- HVAC tagging in Revit: ducts, fittings, accessories, terminals, and equipmentTag HVAC drawings in Revit automatically. RayCAD tags ducts, flex ducts, fittings, dampers, air terminals, and mechanical equipment, native and fabrication, with your own tag families.
- Information-based tagging in Revit: tags where the information changesRayCAD tags MEPF drawings where the information changes and where readability needs it. Unlike Revit's Tag All, it does not put every tag on every element.
- Intelligent tagging in Revit: how RayCAD places tagsRayCAD is smart tagging for Revit. It reads precise geometry through the Revit API, then places non-overlapping MEPF tags in a neat, consistent, human-like layout.
- Automatic mechanical equipment tagging for Revit: AHUs, VAVs, FCUs, and moreRayCAD tags mechanical equipment in Revit automatically: AHUs, VAVs, FCUs, fans, pumps, chillers, and 20 more equipment types, with identifier and model tags that sit clear of the unit.
- MEP tagging in Revit: RayCAD does the whole MEPF tagging jobRayCAD is a Revit plugin for end-to-end MEPF tagging and annotation. It tags ducts, pipes, fittings, accessories, air terminals, and equipment across a whole view in one run.
- Automatic pipe elevation tagging for Revit: elevations placed where they changeRayCAD places Revit pipe elevation tags automatically, at the start of each run and wherever the elevation changes, in the datum your tag family shows: BOP, CL, or TOP.
- Pipe tagging in Revit: automatic pipe tags for plumbing and hydronic drawingsTag pipes in Revit automatically. RayCAD places pipe size, system, and elevation tags on pressurised and gravity pipes, groups parallel pipes under one tag block, and tags valves.
- Revit tagging plugin for Revit 2021 to 2027RayCAD is a Revit tagging plugin that runs inside Revit 2021 to 2027 with one installer and one update button. We handle the API differences between versions, and we commit to supporting every future Revit release.
- Revit plugin data security: RayCAD runs on your machineRayCAD runs entirely on your machine. No model or project data, tag families, or views reach our servers, and we sign an NDA if your firm requires one.
- Revit plugin crashes and stability: how RayCAD stays dependableRevit plugin crashes can disrupt MEPF tagging. See how RayCAD uses safe model changes, error handling, one-step undo, and heavy testing to stay dependable on production drawings.
- Structural tagging in Revit: beam tags, column tags, and framing tagsHow to tag structural drawings in Revit: beam tags, column tags, structural framing tags, and rebar tags. See what each carries and how RayCAD approaches placing them.
- Use your own Revit tag families with RayCADRayCAD is a third-party plugin that works with your own Revit tag families and element families. It measures each tag precisely, so you keep your drawing standard and your drawings look the same as today.